Producto sin fotografía
MINI-BEAM: Replacement Lens Assemblies; Replaces LVAG; Changes LV to LVAG
MINI-BEAM: Aperture; Circular; 0.5 mm (0.02 in) diameter; For Opposed Mode MINI-BEAM Sensors - QTY 20
MINI-BEAM: Aperture; Horizontal Slotted; 0.5 x 6.44 mm (0.02 x 0.25 in); For Opposed Mode MINI-BEAM Sensors - QTY 20
MINI-BEAM: Aperture; Vertical Slotted; 0.5 x 12.7 mm (0.02 x 0.5 in); For Opposed Mode MINI-BEAM Sensors - QTY 20
MINI-BEAM: Aperture; Circular; 1 mm (0.04 in); For Opposed Mode MINI-BEAM Sensors - QTY 20
MINI-BEAM: Aperture; Horizontal Slotted; 1 x 6.4 mm (0.04 x 0.25 in); For Opposed Mode MINI-BEAM Sensors - QTY 20
MINI-BEAM: Aperture; Vertical Slotted; 1 x 12.7 mm (0.04 x 0.5 in); For Opposed Mode MINI-BEAM Sensors - QTY 20
MINI-BEAM: Aperture; Circular; 2.5 mm (0.1 in); For Opposed Mode MINI-BEAM Sensors - QTY 20
MINI-BEAM: Aperture; Horizontal Slotted; 2.5 x 6.4 mm (0.1 x 0.25 in); For Opposed Mode MINI-BEAM Sensors - QTY 20
M12-10 ACCESSORY PKG CAP M12 CONNECTOR 10 PACK
ACCESSORY PKG CAP MINI 7/8 CONNECTOR 10 PACK
Accessory: BC-M12M5-22-1 (1); WAGO WIRE NUT 2-POS LEVER (5)
Nylon Cable Strain Relief Fitting for WLB72 (5 pack); 1/2 NPT Thread with O-Ring and Locking Nut; Suitable for 4.3-11.4 mm cable diameter
Asset Monitoring Gateway; M12 D-Coded Ethernet Cable; SNAP ID Auto-Detect Modbus Devices via 4 in HMI; Power Supply Included
DUO-TOUCH Two-Hand Control Kit Containing:; (2) STBVP6 Buttons w/2 m (6.5 ft) 4-pin cable and PNP Outputs; (1) AT-FM-10K Safety Relay Module
DUO-TOUCH Two-Hand Control Kit Containing:; (2) STBVR81 Buttons w/2 m (6.5 ft) 5-pin cable and Relay Outputs; (1) AT-FM-10K Safety Relay Module
S18U Right-Angle Series: Proximity Mode; Range: 30-300 mm; Input 12-30 V dc; Outputs: Analog 0-10 V; 2 m (6.5 ft) Cable
Accessory: 30 mm - 22 mm Adapter, Pack of 5; Includes: Adapter Ring, Mounting Nut
M48 FRONT MOUNT Accessory: GS60 M48X2 Mounting Knurl Nut
Accessory; Mounting Hardware from SA-F12
STANDOFFS ACCESSORY: WLA MOUNTING STANDOFFS (HARDWARE INCLUDED)
MINI-SCREEN Replacement Part; Mounting Hardware Kit for one Sensor; Used With: Any Receiver or Emitter Sensor
VIBRATION MOUNTS
Enclosure; NEMA-4X rated corrosion-resistant enclosure; Supplied with DIN-35-70 track for easy Mounting; Used with MAXI-AMP module or other control device
88617 MINI-ARRAY: Heated Enclosure; Material: Painted Stainless Steel Enclosure; Array Length: 6 in; Overall Height: 2.2 m; Clear Window: 2.0 m; Back Mountable
Este producto todavía no tiene reseñas. ¡Sé el primero en calificarlo!
Debes iniciar sesión para dejar una reseña de este producto.
